The inhibited effect of some tetrazolic compounds towards the corrosion of brass in nitric acid solutionMIHIT, M; EL ISSAMI, S; BOUKLAH, M et al.Applied surface science. 2006, Vol 252, Num 6, pp 2389-2395, issn 0169-4332, 7 p.Article

Surface study of films formed on copper and brass at open circuit potentialPROCACCINI, R; SCHREINER, W. H; VAZQUEZ, M et al.Applied surface science. 2013, Vol 268, pp 171-178, issn 0169-4332, 8 p.Article

Thermodynamic description of Cu-Mg-Ni and Cu-Mg-Zn systemsMIETTINEN, Ivrki.Calphad. 2008, Vol 32, Num 2, pp 389-398, issn 0364-5916, 10 p.Article

Thermodynamic description of the Cu-Al-Si system in the copper-rich comerMIETTINEN, Jyrki.Calphad. 2007, Vol 31, Num 4, pp 449-456, issn 0364-5916, 8 p.Article

Effect of copper content on the mechanical and sliding wear properties of monotectoid-based zinc-aluminium-copper alloysSAVASKAN, Temel; HEKIMOGLU, Ali Papa; PÜRCEK, Gencaga et al.Tribology international. 2004, Vol 37, Num 1, pp 45-50, issn 0301-679X, 6 p.Article

Orientation relationships and lattice matching for the S phase in Al-Cu-Mg alloysWINKELMAN, G. B; RAVIPRASAD, K; MUDDLE, B. C et al.Acta materialia. 2007, Vol 55, Num 9, pp 3213-3228, issn 1359-6454, 16 p.Article

Studies of retrogression and reaging behavior in a 1441 Al-Li-Cu-Mg-Zr alloyGHOSH, K. S; DAS, K; CHATTERJEE, U. K et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2005, Vol 36, Num 12, pp 3477-3487, issn 1073-5623, 11 p.Article

Characterization of retrogression and reaging behavior of 8090 Al-Li-Cu-Mg-Zr alloyGHOSH, K. S; DAS, K; CHATTERJEE, U. K et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2004, Vol 35, Num 12, pp 3681-3691, issn 1073-5623, 11 p.Article

Gibbs energy calculation of liquid Zr-Al-Ni and Zr-Al-Cu-Ni alloys with clustersLI, H. Q; YANG, Y. S; TONG, W. H et al.Journal of materials science. 2007, Vol 42, Num 11, pp 4060-4065, issn 0022-2461, 6 p.Article

The tensile deformation, cyclic fatigue and final fracture behavior of dispersion strengthened copperSRIVATSAN, T. S; AL-HAJRI, Meslet; TROXELL, J. D et al.Mechanics of materials. 2004, Vol 36, Num 1-2, pp 99-116, issn 0167-6636, 18 p.Conference Paper

Electrical properties of electroplated Cu(Ag) thin filmsSTREHLE, S; BARTHA, J. W; WETZIG, K et al.Thin solid films. 2009, Vol 517, Num 11, pp 3320-3325, issn 0040-6090, 6 p.Article

THE KINETICS OF DISPERSE ORDER DEVELOPMENT IN ALPHA -CUAL ALLOYSVARSCHAVSKY A; DONOSO E.1983; METALLURGICAL TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE; ISSN 0360-2133; USA; DA. 1983; VOL. 14; NO 5; PP. 875-880; BIBL. 53 REF.Article

Metallographic analysis of Cu-Zr-Al bulk amorphous alloys with yttrium additionCHEN, J; ZHANG, Y; HE, J. P et al.Scripta materialia. 2006, Vol 54, Num 7, pp 1351-1355, issn 1359-6462, 5 p.Article

Study of γ₂ precipitation in Cu-Al-Be shape memory alloysOCHOA-LARA, M. T; FLORES-ZUNIGA, H; RIOS-JARA, D et al.Journal of materials science. 2006, Vol 41, Num 17, pp 5455-5461, issn 0022-2461, 7 p.Article

Dezincification studies of some copper based alloysSASTRI, V. S.Corrosion engineering, science and technology. 2005, Vol 40, Num 2, pp 171-176, issn 1478-422X, 6 p.Article

Using X-ray microdiffraction to determine grain sizes at selected positions in disks processed by high-pressure torsionUNGAR, Tamas; BALOGH, Levente; ZHU, Yuntian T et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2007, Vol 444, Num 1-2, pp 153-156, issn 0921-5093, 4 p.Article

Thermodynamic-kinetic model for the simulation of solidification in binary copper alloys and calculation of thermophysical propertiesMIETTINEN, J.Computational materials science. 2006, Vol 36, Num 4, pp 367-380, issn 0927-0256, 14 p.Article

Application of equal-channel angular pressing to Cu-Co alloy with ferromagnetic precipitatesFUJITA, Takeshi; NISHIMURA, Shunichi; FUJINAMI, Takayoshi et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2006, Vol 417, Num 1-2, pp 149-157, issn 0921-5093, 9 p.Article

Evaluation of nanoscaled precipitates in a Cu-Ni-Si-Cr alloy during agingCHENG, J. Y; TANG, B. B; YU, F. X et al.Journal of alloys and compounds. 2014, Vol 614, pp 189-195, issn 0925-8388, 7 p.Article

Thermodynamic description of the Cu-Pb-Sn system at the Cu-Pb sideMIETTINEN, J; DOCHEVA, P; VASSILEV, G et al.Calphad. 2010, Vol 34, Num 4, pp 415-420, issn 0364-5916, 6 p.Article

Thermodynamic description of the Cu-Pb-Zn systemMIETTINEN, J; GANDOVA, V; VASSIIEV, G et al.Calphad. 2010, Vol 34, Num 3, pp 377-383, issn 0364-5916, 7 p.Article

Stabilization and hyperstabilization of Cu-Al-Be β'₁ martensite by thermal treatment and plastic deformationKUSTOV, S; PANS, J; CESARI, E et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2004, Vol 378, Num 1-2, pp 283-288, issn 0921-5093, 6 p.Conference Paper

Alliages de cuivre: quelles applicanoos dans le futur face à leurs concurrent ?LACOSTE, Isabelle; STUCKY, Michel.Fonderie magazine. 2010, Num 9, pp 16-19, issn 2106-7635, 4 p.Article

Microsegregation in Al-Cu alloysKURUM, E. C; DONG, H. B; HUNT, J. D et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2005, Vol 36, Num 11, pp 3103-3110, issn 1073-5623, 8 p.Article

Further aspects on J-evaluation demonstrated with EDM notched round bars and double-edged plates between 300 and 7 KNYILAS, A; NISHIMURA, A; OBST, B et al.Advances in cryogenic engineering. 2002, Vol 48, pp 131-138, issn 0065-2482, 8 p., aConference Paper